Home > Wireless >

Audio-Technica ATW-1322 Digital Wireless Dual Handheld System w/ 2 Microphones
Audio-Technica ATW-1322 Digital Wireless Dual Handheld System w/ 2 Microphones

Alternative Views:

Our Price: $799.00

Quantity in Stock:
(Out of Stock)

Availability: 0
Product Code: ATW-1322

Description Extended Information

Audio-Technica’s ATW-1322, part of the System 10 PRO Rackmount digital wireless series, provides the same interference-free operation in the 2.4 GHz range (outside TV bands) as the original System 10 but with expanded features and versatility. The durable half-rack chassis is equipped to house two receiver units that can be operated locally or released from the chassis and mounted remotely (up to 328 feet away) via Ethernet cable. Up to five chassis (10 receiver units) can be linked using the RJ12 cable included with each system, creating a stable, multichannel system with the simultaneous use of up to 10 channels.

Like all the products in the System 10 wireless family, the PRO Rackmount features 24-bit operation, easy setup, clear, natural sound quality, and three levels of diversity assurance: frequency, time, and space. Frequency Diversity sends the signal on two dynamically allocated frequencies for interference-free communication. Time Diversity sends the signal in multiple time slots to maximize immunity to multipath interference. Space Diversity uses two antennas on each transmitter and receiver unit to maximize signal integrity.

The ATW-1322 includes an ATW-RC13 receiver chassis with rackmount adapters, two ATW-RU13 receiver units with corresponding AT8690 receiver unit mounting brackets, a joining plate (for dual-channel systems only), one RJ12 cable, one AC adapter and two ATW-T1002 handheld cardioid dynamic microphone transmitters. Both the receiver chassis and transmitters feature easy-to-read displays.

Audio-Technica ATW-1322 Features:

  • Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance
  • Operates in the 2.4 GHz range – completely free from TV interference
  • Receiver units can be docked in the chassis or mounted remotely (up to 328 feet away) via Ethernet cable for added versatility
  • Up to five chassis (ten receiver units) can be linked and used simultaneously
  • Each receiver unit can be paired with up to 10 transmitters, allowing users to instantly switch between different transmitter configurations
  • Chassis’ System ID Display shows RF signal level, system ID, transmitter battery level, and system link status
  • Automatic frequency selection for seamless, interference-free operation
  • Extremely easy operation with instantaneous channel selection, sync, and setup
  • Three levels of diversity assurance: frequency, time & space
  • Ground-lift switch helps eliminate audible hum caused by ground loops

  • Overall System:
    • Operating Frequencies: 2.4 GHz ISM band
    • Dynamic Range: > 109dB (A-weighted), typical
    • Total Harmonic Distortion: < 0.05% typical
    • Operating Range: 200 ft (60 m) Open range env. with no interfering signals
    • Operating Temperature Range: 0° C to +40° C (32° F to 104° F) Battery performance may be reduced at very low temperatures
    • Frequency Response: 20 Hz to 20 kHz (Depending on microphone type)
  • Receiver Specifications:
    • Receiving System: Diversity (frequency/time/space)
    • Output Connectors: Remote Receiver Connector: RJ45
    • Link Connector: RJ12
    • Maximum Output Level: XLR, balanced: 0 dBV 1/4" (6.3 mm), unbalanced: +6 dBV
    • Power Supply: 100-240V AC (50/60 Hz) to 12V DC 0.5A power supply switched mode external
    • Dimensions (WxHxD): 8.26" x 1.73" x 6.67" (209.8mm x 44mm x 169.3mm)
    • Net Weight: 33.2 oz (940 grams)
    • Accessories Included: AC adapter, Link cable, Rack-mount adapters, Joining plate, Rubber feet
  • Handheld Transmitter Specifications:
    • RF Power Output: 10 mW
    • Spurious Emissions: Following federal and national regulations
    • Batteries: Two 1.5V AA (not included)
    • Battery Life: > 7 hours (alkaline) Battery
    • Dimensions: 10.03" long x 1.97" diameter (254.8mm x 50.0mm)
    • Net Weight: 9.9 oz (280 grams) without batteries
    • Accesory Included: AT8456a Quiet-Flex™ stand clamp

Share your knowledge of this product. Be the first to write a review »