|
Sprague Orange Drop Capacitors
We’ve used Sprague Orange Drop Capacitors in our builds
since day 1. Orange Drop® Polyester Film/Foil Capacitors are wound from the
most reliable polyester film and aluminum foil available and are protected by
a rugged conformal coating of orange epoxy.
All of that to say, these capacitors do a tremendous job
of warming up your tone and taking away some of the bite of an overly bright
sound. Like our potentiometers, these capacitors are held to a ±10%
tolerance.
920D Custom 450G Series Potentiometers
920D Custom
potentiometers are used in this build. Our pots are manufactured by CTS to our
exact specifications and are metered for accuracy before being used in any 920D
Custom gear. We specify a 10% audio taper, accompanied with a low rotational
torque rating of 0.50-2.00 in.oz (compared to the industry standard 0.75-6.00
in.oz rating) to provide a buttery knob sweep. We hold potentiometer tolerances
to ±10%. The industry standard is ±20%. Tightening potentiometer tolerances
will help you accurately shape your tone.
Pure Tone
1/4” Output Jack
We
exclusively use Pure Tone output jacks in all builds. Why? Because they’re
unquestionably better than the old, industry standard. Period.
We’ve all
heard the crackle of a weak connection caused by pressure grounds. This is
due to the old style jack only having 1 squared-off point of contact trying
to meet a rounded ¼” plug. Pure Tone has completely changed that.
Pure Tone’s
multi-contact ¼” output jack has 4 rounded contact points that hold the ¼”
plug firmly in place. With 4 times the contact points, all of the
dreaded cracks, snaps, and pops are gone for good. Trust us, the second you
plug into this jack, you’ll never want to go back.
Switchcraft 3
Way Switch
Our LP-PAGE+T
is built using a genuine Switchcraft 3 Way Switch. These switches are well
known for their durability and noise-free reliability. Switchcraft switches are
rated to last a lifetime. This switch is, hands-down, the switch you want in
your Les Paul.
Hand-Built
In The U.S.A.
All 920D
Custom creations are hand-built by experienced technicians at our
headquarters in Conway, Arkansas. We treat your new gear like it’s going into
one of our own guitars. Every millimeter of wire is cut precisely, every
solder joint is perfectly smooth and symmetrical, and every bend is
purposeful and direct. We hold everything to a tremendous level of quality
because we know the smallest details matter and we take great pride in our
work. | 