Home > Microphones >

Sennheiser DRUMKIT600 Drum Microphone Package
Sennheiser DRUMKIT600 Drum Microphone Package


 
Alternative Views:


FREE SHIPPING
Our Price: $999.95

Availability: In Stock
Product Code: DRUMKIT600
Qty:

Description Extended Information
 
Sennheiser DRUMKIT600 Drum Set Microphone Package

Inside the e600 Drum Pack you'll find a mic tuned specifically for low frequencies, a quartet of tom- and snare-friendly mics, and a pair of condensers for overheads and cymbals. In all, you get seven mics, each specifically chosen for the e600 Drum Pack to handle a specific task. Everything you need is inside the custom slim-line aluminum case with custom-cut foam, which provides a great way to safely transport your mics to and from the gig, the studio, or wherever!

To handle the kick drum, there's the Sennheiser e602 II, a cardioid instrument mic especially suited for use with bass drums, bass guitar cabs, tubas and other low frequency instruments.

Toms and snare need more midrange and high-frequency content to really punch through, and the e604 delivers. The e604 is a high-SPL handling (more than 150dB) cardioid microphone, optimized for use on drum sets and other percussion miking applications. The e604 microphone actually comes with an integrated, pivoting mount that can screw directly onto mic stands or attach to the rim of a drum, making setup very efficient. A balanced, clear, low-distortion signal from the e604 is similar to a high-end studio condenser microphone. A lightweight voice coil provides extended high frequency and rapid transient response. This quality drum mic is housed in a tough, reinforced glass fiber body designed to suppress impact noise. If you're looking to mic your toms or snare, the e604 is a dynamic mic ready for the job!

The e614's supercardioid pattern, in combination with a neutral response and moderate sensitivity, insures optimum isolation from other instruments on stage. Unobtrusive for precise placement and powered by external phantom power, the e614 tolerates extremely high SPLs, precisely capturing cymbals and hi-hats like no other mic in its price range.

e 602 II Features

  • Rugged, lightweight aluminium body for stable positioning on long microphone boom arms
  • Lightweight high-performance voice coil construction
  • Fast transient response
  • Low frequency extension
  • Ideal for direct use on the most problematic bass signal
  • Frequency-independent directivity provides isolation from other on-stage signals
  • Humbucking coil
  • Integral stand mount

e 604 Features

  • Rugged reinforced glass-fibre body
  • Low sensitivity to impact and handling noise
  • Very high sound pressure handling capability
  • Low distortion microphone
  • Hum compensating coil
  • Easy to position due to compact design
  • Integral stand mount

e 614 Features

  • 40-20,000 Hz
  • Designed for demanding applications where extended frequency range, high SPL handling, fast transient response and small size are required
  • Captures the shimmer and the contact of sticks, mallets and hands
  • Nearly flat response from 40 Hz to 20 kHz and a supercardioid pattern

e 602 II Specifications

Dimensions

Ø 60 x 153 mm

Connector

XLR-3

Frequency response

20.....16000 Hz

Weight

318 g

Sensitivity in free field, no load (1kHz)

0,25 mV/Pa; (50 Hz) 0,9 mV/Pa

Nominal impedance

350 Ohm

Min. terminating impedance

1000 Ohm

 

e 604 Specifications

Dimensions

Ø 33 x 59 mm

Connector

XLR-3

Frequency response (microphone)

40.....18000 Hz

Weight

Without cable: 60 g

Sensitivity in free field, no load (1kHz)

1,8 mV/Pa

Nominal impedance

350 Ohm

Min. terminating impedance

1000 Ohm

Weight w/o cable

60 g

 

e 614 Specifications

Dimensions

Ø 20mm, L = 100mm

Connector

XLR-3

Frequency response

40 Hz ... 20 kHz

Transducer principle

pre-polarised condenser microphone

Weight

w/o cable: 93 g

Pick-up pattern

super-cardioid

Sensitivity in free field, no load (1kHz)

3 mV/Pa = - 50dB (0 dB = 1 V/Pa)

Nominal impedance

50 Ohm

Min. terminating impedance

1000 Ohm

Phantom powering

12 – 52 V / 3 mA

Equivalent noise level

24 dB(A)

Equivalent noise level weighted as per CCIR 468-3

35 dB

Maximum sound pressure level (passiv)

139 dB/SPL

 


Share your knowledge of this product. Be the first to write a review »