Shure PGDMK6 Drum Set Kit Microphone Package
Product Code: PGDMK6
Our Price: $399.00
Description
Shure 6 Pc Drum Kit Microphone Package PGDMK6
Shure's PGDMK6 6-Mic Pack includes 6 microphones: one PG 52 for the kick drum, three PG56 mics for the snare and toms drums, and two PG81s for overheads to capture your cymbals. Shure has included all the cables and clips you need, too. There's no denying that a drum kit is one of the toughest instruments to record. But with the Shure PGDMK6 6-mic drum pack, you don't have to break the bank to get the gear you need. Start tracking rehearsals, demos, and more with the most complete drum package. Please Note: the 2 PG81s overhead mics require phantom power.
A complete drum microphone package. The PGDMK6 Drum Microphone Kit includes:
(3) Three PG56 snare/tom microphones (1) One PG52 kick drum microphone (2) Two PG81 overhead instrument microphones (3) Three A50D drum mounts (6) Six 15ft XLR-XLR cables (1) One durable carrying case
PG56:
• Microphone Type: Dynamic (moving coil)
• Polar Pattern: Cardioid (unidirectional)
• Frequency Response: 50Hz-15kHz
• Polarity: Positive pressure on diaphragm produces positive voltage on pin 2
relative to pin 3 of microphone output connector
• Output Impedance (at 1000 Hz): 200 ohms
• Sensitivity (at 1000 Hz): -56 dBV/Pa, (1.6 mV), 1 Pascal=94 dB SPL
• Electromagnetic Hum Sensitivity: 26 dB equivalent SPL in a 1 millioersted
field (60 Hz)
• Connector: Three-pin professional audio connector (male XLR type)
PG52:
• Microphone Type: Dynamic (moving coil)
• Polar Pattern: Cardioid (unidirectional)
• Frequency Response: 30Hz-13kHz
• Polarity: Positive pressure on diaphragm produces positive voltage on pin 2
relative to pin 3 of microphone output connector
• Output Impedance (at 1000 Hz): 300 ohms
• Sensitivity (at 1000 Hz): -55 dBV/Pa, (1.8 mV), 1 Pascal=94 dB SPL
• Electromagnetic Hum Sensitivity: 25 dB equivalent SPL in a 1 millioersted
field (60 Hz)
• Connector: Three-pin professional audio connector (male XLR type)
PG81:
• Microphone Type: Condenser (electret bias)
• Polar Pattern: Cardioid (unidirectional), symmetrical about axis
• Frequency Response: 40 Hz-18kHz
• Polarity: Positive pressure on diaphragm produces positive voltage on pin 2
relative to pin 3 of microphone output connector
• Output Impedance (at 1000 Hz): 600 ohms
• Sensitivity (at 1000 Hz): -48 dBV/Pa, (4.0 mV), 1 Pascal = 94 dB SPL
• Electromagnetic Hum Sensitivity: -7 dB equivalent SPL in a 1 millioersted
field (60 Hz)
• Switch: Built-in On/Off switch
• Recommended Input Load Impedance: 800 ohms minimum
• Output Clipping Level (1 kHz, 1 % THD) 2000 ohm load: 13 dBV (0.22 V)
(phantom), -17 dBV (0.14 V) (battery)
• Maximum SPL (2000 ohm load): 131 dB (phantom), 127 dB (battery)
• Self-Noise (Equivalent SPL): 20 dB typical, A-weighted
• Dynamic Range (maximum SPL, 2k ohm load, to A-weighted noise level): 111 dB
(phantom); 107 dB (battery)
• Signal-to-Noise Ratio: 68 dB at 94 dB SPL
• Power: (Phantom Power): Supply Voltage: 11 to 52 Vdc, Current Drain: 2.0 mA
max at 52 Vdc, Maximum External Voltage Applied to Pins 2 and 3 with respect to
Pin 1: +52 Vdc Reverse polarity protected to: 100 Vdc; (Battery Power):
Recommended: 1.5 V alkaline AA size (NEDA 15A) Life: up to 10,000 hours
• Connector: Three pin professional audio connector (male XLR type)